Elna eXperience 540S handleiding
Handleiding
Je bekijkt pagina 68 van 100
62
q
e
w
b Remove the fabric from the machine and cut the
sewing threads.
n Pull the left end of the filler cord to tighten it.
Thread the end of the cord through a darning
needle and draw it to the wrong side of the fabric
and cut.
Corded Buttonhole
Machine Settings
q Pattern: #06
w Presser foot: Automatic buttonhole foot R
e Thread tension dial: 1-5
zx
b n
cv
q we
z With the automatic buttonhole foot R raised, hook
the filler cord on the spur q on the back of the
buttonhole foot.
x Bring the ends of cord toward you under the
buttonhole foot clearing the front end.
Hook the ends of the filler cord e into the forks w
on the front of the buttonhole foot to hold them
tight.
c Lower the needle into the garment where the
buttonhole will start and lower the foot.
v Lower the buttonhole lever and buttonhole foot.
Start the machine and sew the buttonhole over the
filler cord.
The machine stops automatically when finished.
NOTES:
Set the stitch width in accordance with the thickness
of the filler cord used.
To cut the buttonhole opening, refer to page 56.
To sew a corded buttonhole, follow the same
procedure as for a square buttonhole.
Bekijk gratis de handleiding van Elna eXperience 540S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elna |
| Model | eXperience 540S |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 9982 MB |
