Elna eXcellence 790PRO handleiding
Handleiding
Je bekijkt pagina 86 van 148
w
q
e
84
Checking Pattern Combination Length
You can check the total length of the pattern combination
by pressing on the pattern combination length key.
q Pattern combination length key
The readout of the total length is a theoretical value
and the actual length may vary depending on sewing
conditions.
For example, select the pattern P5 three times, and sew
a pattern combination.
If the actual length differs considerably from the readout,
measure the actual length and enter the nearest value by
pressing the “+” or “–” key.
In this case, the theoretical value is 51 mm. However, if
the actual length w is 40 mm, enter 40 mm by pressing “–”
key. Press the OK to register it.
w Actual length
The readout is adjusted automatically when calculating
the length of other pattern combinations.
The message “Displays the length of the corrected
pattern.” appears to indicate that the displayed value is
adjusted already.
For example select patterns P10, P16 and P5.
The theoretical value is 53 mm. However, the read out is
calculated according to the measured actual length. In
this case, the adjusted value is 42 mm.
Press the default key to clear the entered actual length.
e Default key
Bekijk gratis de handleiding van Elna eXcellence 790PRO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elna |
| Model | eXcellence 790PRO |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 39891 MB |
