Elna eXcellence 790PRO handleiding

148 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 17 van 148
10
u
re t
i
y
14910 11 12
1231
31234 5 6
15
Press the auto-lock button to sew a locking stitch
immediately. The machine will automatically stop.
When the machine is stopped, press the auto-
lock button and the LED signal u will blink. The
machine will immediately sew locking stitches and
automatically stop when the machine is started.
• When any other stitches are selected;
Press the auto-lock button to sew a locking stitch
at the end of the current pattern. The machine will
automatically stop.
When the machine is stopped, press the auto-lock
button and the LED signal u will blink. The machine
will sew a locking stitch at the end of the current
pattern and automatically stop when the machine is
started.
The machine will trim the threads automatically after
locking the stitch when the auto thread cutting is
turned on (refer to page 128).
r Needle up/down button
Press this button to bring the needle bar up or down.
The machine will stop with the needle in the down
position.
However, you can change the needle stop position in the
machine setting mode (refer to page 128).
t Thread cutter button
After nishing sewing, press this button to trim the
threads. The needle bar automatically rises after trimming
the threads (refer to page 39).
The LED signal i blinks when the machine trims
threads.
After using auto thread cutting or threading the bobbin
holder, you can start sewing without drawing up the
bobbin thread.
NOTE:
The thread cutter button does not function:
- directly after turning on the power.
- when the presser foot is raised with the foot lifter.
- after being pressed 3 times in a row.
Use the thread cutter on the face plate if the thread is
#30 or thicker (refer to page 39).
e Auto-lock button
• When the following stitch patterns are selected;
Utility Applique Quilt Bridge
y
Presser foot lifter button
The presser foot will go up or down by pressing this
button.
You can also use the presser foot lifter and knee lifter to
raise and lower the presser foot (refer to page 19).

Bekijk gratis de handleiding van Elna eXcellence 790PRO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkElna
ModeleXcellence 790PRO
CategorieNaaimachine
TaalNederlands
Grootte39891 MB