Elna eXcellence 790PRO handleiding
Handleiding
Je bekijkt pagina 110 van 148
2 cm (3/4˝)
2 cm (3/4˝)
qq
w
e
r
0.3 cm
108
Left of teeth
Raise the foot and replace it with the invisible zipper foot Z.
Remove the basting stitches.
Open the zipper and insert the pull tab between fabric
and zipper tape to allow the slider to reach the stopper.
q Pull tab
Right side of tape
Turn and fold the bodice to the left.
Seam along the edge of the right zipper tape and reverse
the stitches 2 cm (3/4˝) before the zipper bottom.
Left side of tape
Raise the foot and close the zipper.
Replace the foot with the zipper foot E.
Turn and fold the bodice to the right. Seam along the
edge of the left zipper tape and reverse the stitches 2 cm
(3/4˝) before the zipper bottom.
Raise the zipper teeth on the left and lower the foot
so the right groove of the foot catches the zipper teeth.
Stitch through the zipper tape and fabric up to the
end of the opening. Reverse the stitches to secure
the seam.
w Zipper teeth
e Right groove
Slide up the stopper to 0.3 cm (1/8˝) below the end of the
opening and fasten the stopper with pliers.
r Stopper
Bekijk gratis de handleiding van Elna eXcellence 790PRO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elna |
| Model | eXcellence 790PRO |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 39891 MB |
