Elna eXcellence 760 Pro handleiding
Handleiding
Je bekijkt pagina 40 van 112
38
Sewing with the Upper Feed Device
Patterns number D1, D2, D3, D4, D96, D97, D98, D99,
D100, D1S, D2S, D3S, D4S, D97S and D98S can be
sewn with the upper feed device.
The upper feed device is extremely effective for sewing
with hard to feed material such as vinyl or leather. It also
eliminates layer slippage.
NOTE:
See page 14–15 for how to attach the upper feed foot
and to engage the upper feed device.
Sewing
Raise the presser foot and position the fabric next to a
seam guide on the needle plate. Lower the needle at the
point where you wish to start.
Pull the needle toward the rear. Lower the presser foot.
Start sewing at medium speed. Gently guide the fabric
along the seam guide letting the fabric feed naturally.
When seaming plaid fabrics, match the plaids of the
upper and lower layers and pin them together.
Upper Feed balancing Dial
The upper feed balancing dial should be set at “0”.
However, you may need to adjust the upper feed balance
with this dial since the effect of the upper feed varies
depending on the type of fabric.
Test sew on scrap piece of the fabric you intended to sew
to check the feed balance.
(A): If the lower layer puckers, turn the upper feed
balancing dial toward “+”.
(B): If the upper layer puckers, turn the upper feed
balancing dial toward “–”.
q Upper feed balancing dial
w Upper layer
e Lower layer
Set the feed balancing dial to “0” after the upper feed
sewing.
NOTE:
Reducing the foot pressure will also improve the feed
balance.
q
w
e
w
e
(A)
(b)
Bekijk gratis de handleiding van Elna eXcellence 760 Pro, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elna |
| Model | eXcellence 760 Pro |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 14473 MB |
