Elna eXcellence 720PRO handleiding
Handleiding
Je bekijkt pagina 77 van 112
75
Angle Scales on the Needle Plate
You can easily seam patchwork pieces at the desired
angle without marking, by using the angle scales on the
needle plate.
The angle scales are marked at 45, 60, 90 and 120
degrees.
Use the broken lines when piecing the patchwork pieces
with the 1/4˝ seam foot O as illustrated.
q Broken line
NOTE:
Use the solid lines when piecing the patchwork pieces
with the zigzag foot A. Align the edge of the fabric to
the 1/4˝ seam guide line.
w Solid line
e 1/4˝ seam guide line
Patterns 082 to 084 in mode 2 are special stitches for
seaming patchwork pieces.
Patterns 083 and 084 are for patchwork piecing with 1/4˝
and 7 mm seam allowances respectively.
Use the 1/4˝ seam foot O.
Place the patchwork pieces right sides together. Sew
while guiding the edge of fabric along the guide.
q Guide
w Right side of the fabric
e
q
w
q
q
q
w
w
w
e r
q
Patchwork Piecing
q Pattern: MODE 1: 4 or
MODE 2: 082-084
w Presser foot: 1/4˝ seam foot O or
Zigzag foot A
e Thread tension: 2-6
r Foot pressure: 2-3
Open the seam flat with the right side up and sew
patchwork stitch along the seam line.
Patchwork
q Pattern: MODE 1: 9 or MODE 2: 100
w Presser foot: Satin stitch foot F
e Thread tension: 1-4
r Foot pressure: 2-3
The following stitch patterns can also be used for
patchwork.
w
e r
q
MODE 2
Bekijk gratis de handleiding van Elna eXcellence 720PRO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elna |
| Model | eXcellence 720PRO |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 14525 MB |
