Elna eXcellence 720PRO handleiding
Handleiding
Je bekijkt pagina 27 van 112
25
Drawing up the Bobbin Thread
After using auto thread cutting or threading the bobbin
holder, you can start sewing without drawing up the
bobbin thread.
However, you need to draw up the bobbin thread when
sewing gathering stitches etc.
z
Remove the bobbin. Insert the bobbin into the bobbin
holder again and rethread the bobbin holder according
to the instructions on page 21, but leave a 10 cm (4˝)
tail of bobbin thread as shown.
q Bobbin thread
NOTE:
Do not cut the bobbin thread with the thread cutter.
w Thread cutter
x
Raise the presser foot. Hold the needle thread lightly
with your left hand.
e Needle thread
c
Press the needle up/down key twice to lower and raise
the needle and pick up the bobbin thread.
r Needle up/down key
v
Pull both threads 10 cm (4˝) under and behind the
presser foot.
z
c
v
x
r
q
w
e
Bekijk gratis de handleiding van Elna eXcellence 720PRO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elna |
| Model | eXcellence 720PRO |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 14525 MB |
