Elna eXcellence 720PRO handleiding
Handleiding
Je bekijkt pagina 17 van 112
15
Removing and Attaching the Foot Holder
Remove the foot holder before using Professional grade
foot HP, Darning foot PD-H, Convertible free motion
quilting foot QB-S, or Dual feed foot AD.
CAUTION:
Always make sure to press the lockout key to lockout
the machine before replacing the foot holder.
Removing the foot holder
Raise the needle by pressing the needle up/down key.
Press the lockout key and raise the presser foot with the
presser foot lifter.
q Needle up/down key
w Lockout key
e Presser foot lifter
Loosen the setscrew and remove the foot holder.
r Setscrew
t Foot holder
Attaching the foot holder
Attach the foot holder to the presser bar from the rear.
Tighten the thumbscrew securely with the screwdriver.
y Presser bar
q
w
t
t
r
y
r
Adjusting the Foot Pressure
The foot pressure dial should be set at “3” for regular
sewing.
Reduce the pressure for appliqué, sewing on fine
synthetics and elastic fabrics.
Set the dial at “1” when sewing extra fine fabrics.
Consult information on the LCD screen for the
recommended foot pressure setting.
q Foot pressure dial
w Setting mark
e Recommended foot pressure setting
NOTE:
Do not reduce the foot pressure lower than “0”.
q
w
e
e
Bekijk gratis de handleiding van Elna eXcellence 720PRO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elna |
| Model | eXcellence 720PRO |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 14525 MB |
