Elna eXcellence 580+ handleiding
Handleiding
Je bekijkt pagina 83 van 88
81
Troubleshooting
Condition Cause Reference
The needle thread
breaks
1. The needle thread is not threaded properly.
2. The needle thread tension is too tight.
3. The needle is bent or blunt.
4. The needle is incorrectly inserted.
5. The needle thread is not set under the presser foot when start sewing.
6. The thread is tangled around the spool.
Page 19
Page 12
Page 14
Page 14
Page 26
Use the spool holder.
The bobbin thread
breaks
1. The bobbin thread is not threaded properly in the bobbin holder.
2. Lint has collected in the bobbin holder.
3. The bobbin is damaged and does not turn smoothly.
Page 18
Page 78
Change the bobbin.
The needle breaks 1. The needle is incorrectly inserted.
2. The needle clamp screw is loose.
3. The needle is too ne for the fabric being used.
4. An inappropriate presser foot is used.
Page 14
Page 14
Page 14
Use the correct foot.
Skipped stitches 1. The needle is incorrectly inserted, bent or blunt.
2. The needle and/or threads are not suitable for the work being sewn.
3. A blue tip needle is not being used for sewing stretch, very ne fabrics
and synthetics.
4. The needle thread is not threaded properly.
5. A poor quality needle is used.
Page 14
Page 14
Use the stretch stitch
needle.
Page 19
Change the needle.
Seam puckering 1. The needle thread tension is too tight.
2. The needle thread is not threaded properly.
3. The needle is too heavy for the fabric being sewn.
4. The stitch length is too long for the fabric.
5. The foot pressure is not adjusted properly.
6. A stabilizer is not used when sewing very ne fabrics.
Page 12
Page 19
Page 14
Make stitch shorter.
Page 11
Apply a stabilizer.
The fabric is not
feeding smoothly
1. The feed dog is packed with lint.
2. The stitches are too ne.
3. The feed dog is not raised after ”drop feed” sewing.
Page 78
Make stitch longer.
Page 11
Loops on the seams 1. The needle thread tension is too loose.
2. The needle is too thick or too ne for the fabric.
Page 12
Page 14
The machine does
not work
1. The machine is not plugged in or foot control is not connected.
2. Thread has been caught in the hook race.
3. The presser foot is not lowered.
Page 7
Page 78
Page 11
Buttonhole sewing
is not sewn properly
1. The stitch density is not suitable for the fabric being sewn.
2. The interfacing has not been used for the stretch or synthetic fabric.
3. The buttonhole lever is not lowered.
Page 47
Apply an interfacing.
Page 45
The machine is
noisy
1. Thread has been caught in the hook race.
2. Lint has built up in the hook race or bobbin holder.
Page 78
Page 78
Layers shift 1. The foot pressure is not suitable for fabrics being sewn. Page 11
Auto thread cutting
failed
1. Thread is too thick for the auto thread cutting.
2. Threads have been caught in the thread cutter mechanism.
Page 9
Page 78
The stitch pattern
cannot be selected.
1. The stitch pattern is 58 or 60 in mode 2 (Bridge stitches). Page 70
Bekijk gratis de handleiding van Elna eXcellence 580+, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elna |
| Model | eXcellence 580+ |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 0 MB |
