Elna eXcellence 580+ handleiding
Handleiding
Je bekijkt pagina 54 van 88
52
e
Darning
Machine settings
q Pattern: MODE 1: 31
w Thread tension: AUTO
e Presser foot: Automatic buttonhole foot R
r Foot pressure: 5
z Attach the automatic buttonhole foot R and pull the
button holder all the way out.
Place the fabric under the foot, and lower the needle
at the starting point. Then lower the foot.
q Button holder
w Starting point
x Start the machine and sew to the required length, then
press the reverse button. This sets the darning length.
Continue sewing until the machine stops automatically.
e Reverse button
r Required length
c Sew another layer of darning over the rst layer, at a
right angle to it.
NOTE:
The maximum darning length is 2 cm (3/4˝) and the
maximum width is 0.9 cm (3/8˝).
w
q
r
z x c
To sew the same size darning
Simply start the machine to sew another darning in the
same size.
To sew the different size darning
To sew the next darning in a different size, press the
memory key.
r
r
To sew a shorter darning
Sew the rst line to the desired length and stop the
machine.
Press the reverse button and start the machine again.
The machine will sew the rest of the darning and stop
automatically.
q
e
w
r
e
Bekijk gratis de handleiding van Elna eXcellence 580+, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elna |
| Model | eXcellence 580+ |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 0 MB |
