Elna eXcellence 580+ handleiding
Handleiding
Je bekijkt pagina 44 van 88
42
t
NOTE:
Do not use the thread cutter button to cut the threads.
Otherwise, you cannot tie the threads.
Button Sewing
Machine settings
q Stitch pattern: MODE 1:10
w Thread tension: AUTO
e Presser foot: Satin stitch foot F
r Foot pressure: 5
t Feed dog: Lowered
Lower the feed dog.
Set the speed control slider at a slower speed.
Match the holes of button to the horizontal slot on the
presser foot.
Lower the foot to hold the button in place.
Adjust the stitch width so the needle will enter the left
hole of the button.
Turn the handwheel so that the needle will enter the right
hole of the button. Readjust the stitch width if necessary.
Stitch several times.
After you nish sewing, cut the threads but leave 7.5 cm
– 10 cm (3˝–4˝) of threads at the end.
Pull the bobbin threads to bring the needle threads down
to the wrong side of the fabric.
Tie the threads together.
* After the button sewing is completed, raise the feed dog
for normal sewing.
e
q w
r
Bekijk gratis de handleiding van Elna eXcellence 580+, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elna |
| Model | eXcellence 580+ |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 0 MB |
