Elna eXcellence 580+ handleiding
Handleiding
Je bekijkt pagina 15 van 88
13
Changing the Presser Foot
CAUTION:
Always make sure to turn the power switch off before
replacing the presser foot.
Use the proper foot for the selected pattern.
The wrong foot can cause the needle to break.
Raise the needle to its highest position and raise the
presser foot lifter.
Press the black lever on the back of the foot holder.
The presser foot will drop off.
q Red button
w Presser foot
Attaching the presser foot
Place the presser foot so that the pin on the foot lies just
under the groove of the foot holder.
Lower the presser bar to lock the foot in place.
Each foot is marked with an identication letter.
e Groove
r Pin
t Identication letter
Attaching the foot holder
Attach the foot holder to the presser bar from the rear.
Tighten the thumbscrew securely with the screwdriver.
Removing and Attaching the Foot Holder
CAUTION:
Always make sure to turn the power switch off before
replacing the foot holder.
Removing the foot holder
Raise the needle to its highest position and raise the
presser foot lifter.
Loosen the setscrew.
Remove the foot holder.
q Presser bar
w Foot holder
e Setscrew
q
t
e
r
w
w
w
e
q
e
q
Bekijk gratis de handleiding van Elna eXcellence 580+, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elna |
| Model | eXcellence 580+ |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 0 MB |
