Elna Easycover handleiding
Handleiding
Je bekijkt pagina 38 van 60
32
44 3
44 3
443
q
w e
q
w
r
e
q
w
e
q w
e
(A)
(B)
Balancing the thread tension
z
Set the tension dials as follows:
For narrow-left (3 mm wide):
q
Left needle thread tension dial: 4
w
Center needle thread tension dial: 4
e
Looper thread tension dial: 3
For narrow-right (3 mm wide):
q
Center needle thread tension dial: 4
w
Right needle thread tension dial: 4
e
Looper thread tension dial: 3
For Wide (6 mm wide):
q
Left needle thread tension dial: 4
w
Right needle thread tension dial: 4
e
Looper thread tension dial: 3
x
Check the tension balance by test stitching on the
same fabric and threads as actual garment.
Fine-tune the tension as necessary.
Balanced tension:
The rows of stitches on the right side of the fabric are
straight and even. The looper thread forms a row of
squares with diagonals.
q
Wrong side of the fabric
w
Looper thread
e
Left needle thread
r
Right needle thread
(A) If the needle thread tension is too loose:
– The stitches on the right side are irregular and loose.
– There is a gap between head and tail of the looper
thread crossing points.
Tighten the needle thread tension, and/or loosen the
looper thread tension to correct it.
(B) If the needle thread tension is too tight:
– The fabric puckers.
Loosen the needle thread tension, and/or tighten the
looper thread tension to correct it.
Bekijk gratis de handleiding van Elna Easycover, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elna |
| Model | Easycover |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 5815 MB |
