Elna 864air handleiding
Handleiding
Je bekijkt pagina 38 van 64
36
Securing Ends
To avoid raveling, you need to leave a thread chain
approximately 2˝ (5 cm) long at the beginning and at the
end of a seam. To secure the beginning and end of a
seam, choose one of the following methods.
At the beginning of the seam
A. Separate and tie the thread ends together.
B. Thread the chain through a large eyed needle, and
weave that chain through the overlock stitches on the
fabric.
C. Cut the chain at the edge of the fabric, and apply a
small amount of seam sealant (Fray Check™ or Fray-
No-More™) to the thread ends.
D. Securing the beginning with the machine
z Before putting your fabric in the machine, sew a
thread chain approximately 2˝ (5 cm) long behind
the needle.
x Put your fabric on the machine. Serge a few
stitches and stop.
c Raise the presser foot and bring the thread chain
to the left around and under the presser foot.
v Place the thread chain between the presser foot
and upper knife, holding it in position as you lower
the presser foot to sew.
b After sewing approximately 1˝ (2.5 cm), move the
chain to the right and under the upper knife, cutting
the chain as you sew.
D
A
B
C
At the end of the seam
Securing the seam end with the machine
z Serge one stitch off the end of the seam.
x Raise the needle and presser foot, and gently pull the
threads off the chaining finger.
c Turn the fabric over so that the under side is up.
v Serge approximately 1˝ (2.5 cm) over the stitching and
angle off the fabric.
Cutting the Seams
Cut the upper looper thread with a seam ripper (not
included with the machine) to cut the seams.
q Upper looper thread
w Seam ripper
q
w
z
z
x c v b
x
c
v
Bekijk gratis de handleiding van Elna 864air, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elna |
| Model | 864air |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 7726 MB |
