Elna 864air handleiding
Handleiding
Je bekijkt pagina 23 van 64
21
⁄1 Raise the looper threader lever until it clicks into
place.
!6 Looper threader lever
!6
⁄1
!6
⁄2
!7
!8
!9
@1
@0
⁄3
⁄4
@2
⁄5
o
⁄2 Lower the looper threader lever until it knocks into
place.
⁄3 Make sure that the thread comes out from the hole of
the lower looper tip.
!7 Thread end
!8 Hole of lower looper tip
* If the thread does not come out from the hole,
follow the procedure from step ⁄1 again.
* If the thread comes out behind the pipe, use the
tweezers to draw the thread toward you between
the lower looper and the pipe.
!9 Thread (behind the pipe)
@0 Pipe
@1 Lower looper
⁄4 Draw 4˝ (10 cm) of the thread under the toe of the foot,
and pull it to the rear between the foot and the upper
knife.
@2 Upper knife
⁄5 Return the lower threader switch lever to the “SEWING”
position.
o Lower threader switch lever
Close the looper cover and lower the presser foot
lifter.
Bekijk gratis de handleiding van Elna 864air, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elna |
| Model | 864air |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 7726 MB |
