Eliminator Lighting Vortex 150 handleiding

Niet gecategoriseerd

Eliminator Lighting

31 pagina's

PDF beschikbaar

Handleiding

PRIMARY-SECONDARY CONFIGURATION

This function allows you to link units together to run in a Primary-Secondary set-up, in which one unit

will act as the controlling unit and the others will react to the controlling unit’s built-in programs. Any unit

can be congured to act as a Primary or as a Secondary, but only one unit in a given system can be

programmed to act as the Primary.

Primary-Secondary Connections and Settings:

1. Daisy chain your units via the XLR connectors on the rear panels of each unit. Use standard XLR

data cables to link your units together. Remember that the male XLR connector is the input and

the female XLR connector is the ouput. The rst unit in the chain (primary) will use the female XLR

connector only, and the last unit in the chain will use the male XLR connector only.

2. Use the display screen and control panel to navigate to the “Personality” setting in the main menu.

Select this setting using the ENTER button, and use the UP and DOWN buttons to scroll to “Prim /

Sec Mode” and press ENTER.

3. For the unit that you would like to set as the Primary, use the UP and DOWN buttons to scroll to

“Primary”, press ENTER.

4. For each unit that you would like to set as a Secondary, use the UP and DOWN buttons to scroll to

“Secondary”, press ENTER.

5. The secondary units will now operate in conjunction with the primary unit.

Bekijk gratis de handleiding van Eliminator Lighting Vortex 150, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.