Eliminator Lighting Vortex 150 handleiding

Niet gecategoriseerd

Eliminator Lighting

31 pagina's

PDF beschikbaar

Handleiding

INSTALLATION

FLAMMABLE MATERIAL WARNING

Keep xture minimum 8” (20cm) away from ammable materials and/or pyrotechnics.

ELECTRICAL CONNECTIONS

A qualied electrician should be used for all electrical connections and/or installations.

MINIMUM DISTANCE TO OBJECTS/SURFACES IS 6.6 FEET (2 METERS).

MINIMUM DISTANCE OF FLAMMABLE MATERIALS FROM THE SURFACE IS 8” (20cm)

DEVICE IS INTENDED FOR INDOOR USE ONLY! OUTDOOR INSTALLATION OR

EXPOSURE TO RAIN OR MOISTURE CAN DAMAGE THE DEVICE AND VOID YOUR

MANUFACTURER’S WARRANTY!

DO NOT INSTALL THE FIXTURE IF YOU ARE NOT QUALIFIED TO DO SO!

• Fixture MUST be installed following all local, national, and country commercial electrical and

construction codes and regulations.

• Before rigging/mounting a single xture or multiple xtures to any metal truss/structure or placing

the xture(s) on any surface, a professional equipment installer MUST be consulted to determine

if the metal truss/structure or surface is properly certied to safely hold the combined weight of the

xture(s), clamps, cables, and accessories.

• Maximum fixture ambient operating temperature is 104°F (40°C). Do not use operate the fixture

when ambient temperature exceeds this value!

• Fixture(s) should be installed outside walking paths, seating areas, or areas were unauthorized

personnel might reach the xture by hand.

• NEVER stand directly below the xture(s) when rigging, removing, or servicing.

• Overhead xture installation must always be secured with a secondary safety attachment, such as

an appropriately rated safety cable.

• Allow approximately 15 minutes for the xture to cool down before servicing.

RIGGING

Overhead rigging requires extensive experience, including calculating working load limits,

knowledge about installation materials being used, and periodic safety inspection of all

installation material and the xture, among other skills. If you lack these qualications, do not

attempt the installation yourself. Improper installation can result in bodily injury.

OPERATIONAL BREAKS

Duty Cycle - It is strongly recommended to power the fixture down completely when not in use.

Doing so will reduce wear on the fixture due to sustained or extended operational periods,

thereby maximizing the fixture’s operational lifespan.

Bekijk gratis de handleiding van Eliminator Lighting Vortex 150, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.