Eliminator Lighting Elektron Bar FX handleiding

Niet gecategoriseerd

Eliminator Lighting

29 pagina's

PDF beschikbaar

Handleiding

MULTI UNIT POWER LINKING

This features allows you to connect the fixtures to one another using the power cable input and output

sockets.

The maximum number of units that can be linked in this manner is as follows:

• 7 units @ 120V power

• 14 units @ 230V power

DO NOT EXCEED THIS MAXIMUM NUMBER WHEN POWER LINKING UNITS!

All linked units must be of the same make and model type. Do not mix and match units!

PRIMARY-SECONDARY MODE

This function will allows you to link units together to run in a Primary-Secondary set-up, in which one

unit will act as the controlling unit, and the others will react to the controlling unit’s built-in programs.

Any unit can act as a Primary or a Secondary, but only one unit in a given system can be programmed

to act as the Primary.

Connections and Settings:

1. Daisy chain your units via the XLR connectors on the rear panel of each unit. Use standard XLR

data cables to link your units together. Remember that the male XLR connector is the input and

the female XLR connector is the ouput. The rst unit in the chain (primary) will use the female XLR

connector only, and the last unit in the chain will use the male XLR connector only.

2. Designate one of the xtures as the primary unit by setting the xture to the “Internal Programs”

mode in the main system menu.

3. Designate all other linked xtures as secondary units by setting these xtures to the “DMX Settings”

mode in the main system menu. Remember that only one unit in a given system may be dened as

the primary, and all others must be designated as secondaries.

4. Return to your primary unit, and congure the unit as desired. The secondary unit(s) will now follow

the programming of the primary unit.

Bekijk gratis de handleiding van Eliminator Lighting Elektron Bar FX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.