Eliet Cameleon handleiding
Handleiding
Je bekijkt pagina 30 van 37
30
Nederlands
• Turn off the engine and pull the cable from the spark plug.
• Clean the area around the spark plug and remove the spark
plug from the cylinder head.
• The distance between the electrodes is 0.8 mm.
• If the spark plug is heavily contaminated or dirty, it must be
replaced.
• Complete the following steps to verify ignition quality:
1. Replace the spark plug cap on the plug.
2. Grab the rubber of the spark plug cap and press the outermost
electrodes against the mass of the engine.
3. Pull the starter cord.
4. Check for sparks between the electrodes.
5. The spark plug is in good condition if the sparks are clear and neatly centred between the
electrodes.
6. Weak, irregular and off-centre sparks indicate that the spark plug must be changed.
• Replace the new or old spark plug with care so as not to damage the screw thread. Secure the
spark plug with a torque of 20 Nm.
11.3.4 Changing the air filter
• This procedure is identical to cleaning the air filter (“11.2.3 Cleaning the air filter” on page
26)
• Contact your ELIET dealer or authorised engine service centre to purchase the proper air filter.
Bekijk gratis de handleiding van Eliet Cameleon, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eliet |
| Model | Cameleon |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2919 MB |
