Elica NikolaTesla PRIME S / PRIME S+ PRF0186751 Handleiding (368 Pagina's)

Handleiding

/ 368

Je bekijkt pagina 23 van 368

5. ASSISTANCE

TROUBLESHOOTING TABLE

Informative code Description Possible causes Solution

The command zone switches off

due to an excessively high tem-

perature

The temperature inside the elec-

tronic parts is too high

Wait for the hob to cool be-

fore reusing it

Container unsuitable Loss of magnetic properties Remove the pot

Communication problems

between the user interface and

induction module

No power supply to the module;

the power cable has not been

connected correctly or it is faulty

Disconnect the hob from the

electrical network and check

the connection

For all other error sig-

nals

Call customer service and report the error code

CUSTOMER SERVICE

Before contacting Customer Service

1. Check that the problem cannot be solved by consulting the points in "Troubleshooting".

2. Switch the device off and on again to see if the problem resolves itself.

If the fault persists after the above checks, contact the nearest Customer Service centre.

23

/ 368

Bekijk gratis de handleiding van Elica NikolaTesla PRIME S / PRIME S+ PRF0186751, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.