Handleiding
Je bekijkt pagina 21 van 124
21
1st intake speed active
2nd intake speed active
3rd intake speed active
T3: Increase speed button
press to turn the hood on
press to increase the intake power.
T4: “BOOST” – intensive speed - function button
press T4 to activate the intensive intake speed “BOOST”,
timed for 7 minutes
Note: press T4 again, during the 7 minutes, to go back to the
previously set intake speed
during the “BOOST” active function, pressing:
to go back to the previously set intake speed
to go back to the 3rd intake speed
the previous intake speed remains visible via the indicator
LEDs L1
• if you have set the intensive speed directly with
the hood off, the motor will be turned off.
While using the “BOOST” function, the T4 symbol flashes:
.
Filter Saturation indicator lights
At regular intervals, the hood signals the need to perform
maintenance on the filters.
LED
(L1) on and flashing light (all indicator lights
flashing together) : perform maintenance on the grease
filter.
LED
(L1) on and alternating light (the indicator lights
turn on in sequence): perform maintenance on the active
carbon filter
Note: The filter saturation indicator is visible within the
first 10 seconds on turning on the hood; the saturation
indicators must be reset within this time.
Reset filter saturation indicator:
Press and hold button
LED
(L1) on and off (depending on the type of filter
which is reset, the indicator lights either flash together or
turn on in sequence).
Activation of filter saturation indicator
Note: this operation must be performed with the hood off.
- Grease filter
This indicator is normally activated
1st pressing and holding of buttons
and
if the indicator is active, button
turns on
press button
, to deactivate it
if the indicator is not active, button
turns on
press button
, to activate it
- Active carbon filter
This indicator is normally deactivated
2nd pressing and holding of buttons
and
if the indicator is active, button
turns on
press button
, to deactivate it
if the indicator is not active, button
turns on
press button
, to activate it
Maintenance
Cleaning
Clean using ONLY a cloth dampened with neutral liquid
detergent. DO NOT CLEAN WITH TOOLS OR
INSTRUMENTS. Do not use abrasive products. DO NOT USE
ALCOHOL!
Grease filter
Fig. 10a-20
Traps cooking grease particles.
This must be cleaned once a month (or when the filter
Bekijk gratis de handleiding van Elica BELT BL/F/80, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elica |
| Model | BELT BL/F/80 |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 0 MB |
Caratteristiche Prodotto
| Soort bediening | Sensor |
| Kleur van het product | Zwart |
| Ingebouwd display | Nee |
| Breedte | 798 mm |
| Hoogte | 513 mm |
