Elektrobock PT44 handleiding
Handleiding
Je bekijkt pagina 9 van 16
9
Installation
Install without voltage! The product must only be installed by a person with appropriate
electrical qualifi cations.
The product is intended for mounting on a DIN rail and exclusively for indoor use.
1) Turn off the main circuit breaker.
2) Place the PT44 on a DIN rail in a safe environment.
3) Connect suitable thermostats to terminals
1
, t.e.actuators to terminals
3
, boiler and
circulation pump to terminals
4
and
5
according to the diagram (
Fig.1
).
4) VIf using external control, connect the timer to the terminal
2
.
5) Finally, connect the power supply
6
and turn on the main circuit breaker.
i
The connection of the boiler, actuators and other system elements must comply with the
principles and regulations for the installation of central heating and the recommendations
of the manufacturers of these devices.
When using stranded wire, use ferrules (
Fig.2
).
Safety instructions and maintenance
Do not tamper with the product design. If the product is damaged, do not use it. Have any repairs
carried out by a qualifi ed service technician. Observe the maximum permissible output load, see
technical parameters. Improper use may cause a risk of fi re or electric shock. This product and its
accessories are not toys and are not intended for use by young children or persons whose physical,
sensory or mental disabilities or lack of experience and knowledge prevent them from using the
appliance safely, unless they are supervised or have been instructed in the use of the appliance
by a person responsible for their safety! Protect the product from dirt, moisture, vibrations, shocks
and direct sunlight. Use the product only indoors. Any use of the device that is not specifi ed in the
previous sections of the manual will damage the product and may present a risk of short circuit,
electric shock, etc. The safety instructions must be strictly observed. To clean the surface of the
product, use only a soft cloth slightly moistened with water. Do not use any abrasives or chemical
solvents (paint and varnish thinners) as these may damage the surface and components of the
product.
Bekijk gratis de handleiding van Elektrobock PT44, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elektrobock |
| Model | PT44 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1562 MB |