Electrolux XE65240BX handleiding
Handleiding
Je bekijkt pagina 21 van 24

Problem Possible cause and solution
Poor drying results.
• Tableware was left for too long inside the closed appliance. Activate AirDry to set
the automatic opening of the door and to improve the drying performance.
• There is no rinse aid or the dosage is not sufficient. Fill the rinse aid dispenser or
set the dosage to a higher level.
• The quality of the rinse aid can be the cause.
• Always use rinse aid, even with multi-tablets.
• Plastic items may need to be towel dried.
• The programme does not have the drying phase. Refer to the programme table.
Whitish streaks or bluish
layers on glasses and
dishes.
• The released quantity of rinse aid is too high. Adjust the dosage to a lower level.
• The quantity of detergent is too high.
Stains and dry water
drops on glasses and
dishes.
• The released quantity of rinse aid is not sufficient. Adjust the dosage to a higher
level.
• The quality of the rinse aid can be the cause.
The interior of the appli‐
ance is wet.
• This is not a defect of the appliance. Humidity condensates on the appliance
walls.
Unusual foam during
washing.
• Use the detergent designed specifically for dishwashers.
• Use a detergent from a different manufacturer.
• Do not pre-rinse dishes under running water.
Traces of rust on cutlery.
• There is too much salt in the water used for washing. Refer to the water softener
setting.
• Silver and stainless steel cutlery were placed together. Do not place silver and
stainless steel items close together.
Residues of detergent in
the dispenser at the end
of the programme.
• The detergent tablet was stuck in the dispenser and was not washed away by
water.
• Water cannot wash away the detergent from the dispenser. Make sure that the
spray arms are not blocked or clogged.
• Make sure that items in the baskets do not impede the lid of the detergent dis‐
penser from opening.
Odours inside the appli‐
ance.
• Refer to the Care and cleaning chapter.
• Start the programme with a descaler or a cleaning product designed for dish‐
washers.
Limescale deposits on the
tableware, on the tub and
on the inside of the door.
• The level of salt is low, check the refill indicator.
• The cap of the salt container is loose.
• Your tap water is hard. Refer to the water softener setting.
• Use salt and set regeneration of the water softener even when multi-functional
tablets are used. Refer to the water softener setting.
• Start the programme with a descaler designed for dishwashers.
• If limescale deposits persist, clean the appliance with the suitable detergents.
• Try a different detergent.
• Contact the detergent manufacturer.
ENGLISH 21
Bekijk gratis de handleiding van Electrolux XE65240BX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Electrolux |
Model | XE65240BX |
Categorie | Vaatwasser |
Taal | Nederlands |
Grootte | 2035 MB |