Electrolux WTSL6IE501 handleiding
Handleiding
Je bekijkt pagina 17 van 224
The default selected programme, at
machine switch on, is always the Eco
40-60 programme, also after wake up
from standby.
For more details, refer to Stand-by paragraph
in Daily Use chapter.
7.2 Introduction
The options/functions are not selectable
with all washing programmes. Check the
compatibility between options/functions
and washing programmes in the
"Programme Chart". An option/function
can exclude another one, in this case the
appliance doesn't allow you to set the
incompatible options/functions together.
Make sure the screen and touch buttons
are always clean and dry.
7.3 Temp
When you select a washing programme, the
appliance automatically proposes a default
temperature.
Touch this button repeatedly until the desired
temperature value appears on the display.
When the display shows the indicators
and , the appliance does not heat the
water.
7.4 Schleudern Essorage
When you set a programme, the appliance
automatically selects the default spin speed.
Touch this button repeatedly to:
• Change the spin speed.
The display shows only the spin
speeds available for the set
programme.
• Activate the Rinse Hold option .
The water of the last rinse is not drained
out to prevent the fabrics from creasing.
The washing programme ends with water
in the drum and the final spin phase is not
performed.
The display shows the indicator .
The drum turns regularly to reduce
creasing.
The door stays locked. The drum turns
regularly to reduce creasing. You must
drain the water to unlock the door.
Touch Start/Pause Départ/Pause button:
the appliance performs the spinning phase
and drains the water.
• Activate the Extra silent option.
All spinning phases (intermediate spin and
final spin) are suppressed and the
programme ends with water in the drum.
This helps to reduce creasing.
As the programme is very quiet, it is
suitable for use at night time when
cheaper electricity tariffs are available. In
some programmes the rinses are
performed with more water.
The display shows the indicator .
The door stays locked. The drum turns
regularly to reduce creasing. You must
drain the water to unlock the door.
Touch the Start/Pause Départ/Pause
button: the appliance performs only the
draining phase.
The appliance empties the water out
automatically after approximately 18
hours.
7.5 Flecken/Vorwäsche Taches/
Prélavage
Press this button repeatedly to activate one of
the two options.
The relevant indicator goes on in the display.
• Flecken Taches
Select this option to add an anti-stain
phase to a programme in order to treat
heavily soiled or stained laundry with stain
remover.
Pour the stain remover into compartment
. The stain remover will be added in
the appropriate phase of the washing
programme.
ENGLISH 17
Bekijk gratis de handleiding van Electrolux WTSL6IE501, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electrolux |
| Model | WTSL6IE501 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 21821 MB |
