Electrolux WTSL6IE501 handleiding
Handleiding
Je bekijkt pagina 12 van 224
x4
The appliance must be level and stable.
A correct adjustment of the appliance
level prevents the vibration, noise and
the movement of the appliance when in
operation.
When the appliance is installed on a
plinth, use the accessory described in
chapter 'Accessories'. Read carefully the
instructions supplied with the appliance
and with the accessory.
5.4 The inlet hose
1. Connect the water inlet hose to the back
of the appliance if needed. Usually, it is
already installed at the factory.
20º20º
45º45º
2. Position it toward left or right depending
on the position of the tap. Make sure that
the inlet hose is not in vertical position.
3. If necessary, loose the ring nut to set it in
the correct position
4. Connect the water inlet hose to the cold
water tap with 3/4" thread.
Some model can contain inlet hose with
water stop device. It prevents any leaks in the
hose because of its natural ageing. The
sector in the window shows this fault A. If this
occurs, close the water tap and contact the
authorized service center for information to
replace the hose.
3/4”
3/4”
A
A
A
WARNING!
The inlet water shall not exceed 25 °C.
12 ENGLISH
Bekijk gratis de handleiding van Electrolux WTSL6IE501, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electrolux |
| Model | WTSL6IE501 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 21821 MB |
