Electrolux WAGL4E5R0 handleiding
Handleiding
Je bekijkt pagina 19 van 184
• You make a wrong selection (3 short
sounds).
• The programme is completed (sequence
of sounds for about 2 minutes).
• The appliance has a malfunction
(sequence of short sounds for about 5
minutes).
• When a laundry overload is detected
during ProSense phase (a double sound
played one).
To activate/deactivate this option, hold down
the Extra Rinse button until a beep or a
double beep sounds.
If you deactivate this function, the
acoustic signals stops playing at the end
of the programme only.
8.3 Child Lock
With this option you can prevent children from
playing with the control panel.
To activate/deactivate this option, hold down
the Stains/Prewash button until comes on/
goes off on the display.
The appliance will default to this option after
you switch it off.
The Child Lock function may not be available
for a few seconds after switching the
appliance on.
8.4 Permanent Extra Rinse
With this option you can permanently have an
extra rinse phase, if available with selected
cycle, when you set a new programme.
• To activate/deactivate this option touch
the Extra Rinse and the Time Save push
buttons simultaneously until the indicator
above the Extra Rinse push button and
the corresponding icon on the display
come on/go off.
Press the Extra Rinse button to
deactivate the function on a single
cycle execution without removing the
permanent option.
8.5 Operating Hours Counter
It is possible to visualise the total operating
time of the appliance in hours, starting from
the first switching on. This value will count
operating time of the cycles (does not include
pauses, delayed start time). To visualise this
value, proceed as follows:
1. Switch the appliance on by pressing the
On/Off button.
2. Press and hold the Extra Rinse and Plus
Steam buttons for some seconds.
3. After 3 seconds the total hours operated
by the appliance are shown in the display:
e.g. 1276 hours, the display shows the
text Hr for 2 seconds, 12 (thousands and
hundreds) for 2 seconds and 76 (tens and
units).
4. To exit this mode, press any button.
If the procedure does not work (due to
timeout or wrong keys combination),
switch the appliance off and repeat
sequence from the beginning.
8.6 Factory Defaults
This function allows to restore the factory
default options. To activate this option follow
steps below:
1. Switch the appliance on by pressing
On/Off button.
2. Press and hold the Stains/Prewash and
Time Save buttons for some seconds.
3. The display will show for about 5
seconds.
ENGLISH 19
Bekijk gratis de handleiding van Electrolux WAGL4E5R0, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electrolux |
| Model | WAGL4E5R0 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 18025 MB |
