Electrolux UltraCare 800 EW8T337A handleiding

Wasmachine

Electrolux

64 pagina's

PDF beschikbaar

Handleiding

6.4 Centrifuga

When you set a programme, the appliance

automatically sets the maximum spin speed

allowed, except for programme Denim. With

this option you can change the default spin

speed.

Touch repeatedly this button to:

• Decrease the spin speed. The display

shows only the spin speeds available for

the set programme.

• Additional spin optionsNo Spin

Set this option to deactivate all spin

phases. The appliance performs the only

draining phase of the selected washing

programme. Set this option for very

delicate fabrics. The rinses phase uses

more water for some washing

programmes

• Activate the Rinse Hold option.

The final spin is not performed. The water

of the last rinse is not drained out to

prevent the fabrics from creasing. The

washing programme ends with water in

the drum.

The display show the indicator . The lid

stays locked and the drum turns regularly

to reduce creasing. You must drain the

water to unlock the lid.

If you touch the Avvio/Pausa button,

the appliance performs the spinning phase

and drains the water.

The appliance empties the water out

automatically after 18 hours

approximately.

• Activate the Notturna option.

The intermediate and the final spinning

phases are suppressed and the

programme ends with water in the drum.

This helps to reduce creasing.

The display shows the indicator . The

lid stays locked. The drum turns regularly

to reduce creasing. You must drain the

water to unlock the lid.

As the programme is very quiet, it is

suitable for use at night time when

cheaper electricity tariffs are available. In

some programmes the rinses are

performed with more water.

If you touch the Avvio/Pausa button, the

appliance performs the only draining

phase.

The appliance empties the water out

automatically after 18 hours

approximately.

6.5 Prelavaggio

With this option you can add a prewash

phase to a washing programme.

The corresponding indicator above the touch

button illuminates.

Use this option to add a pre-wash phase at

30 °C before the washing phase.

This option is recommended for heavily soiled

laundry, especially if containing sand, dust,

mud and other solid particles.

The option can increase the programme

duration.

6.6 Macchie

Touch this button to add the stain phase to a

programme.

The corresponding indicator above the touch

button illuminates.

Use this option for laundry with hard stains to

remove.

When you set this option, put the stain

remover into compartment

The stain remover is pre-mixed and heated

with detergent in order to improve its

effectiveness.

This option increases the programme

duration.

This option is not available with a

temperature lower than 40 °C.

10 ENGLISH

Bekijk gratis de handleiding van Electrolux UltraCare 800 EW8T337A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.