Electrolux UltimateTaste 700 EHI635BF handleiding

Fornuis

Electrolux

36 pagina's

PDF beschikbaar

Handleiding

Correct cookware position:

To use this mode you have to place the cookware on the

four connected sections. If you use cookware smaller than

three sections the display shows

and after 2 minutes

the zone switches off.

Incorrect cookware position:

Powerslide Function

This function allows you to adjust the temperature by

moving the cookware to a different position on the

induction cooking area.

The function divides the induction cooking area into

three areas with different heat settings. The hob senses

the position of the cookware and sets the heat setting

corresponding with the position. You can place the

cookware in the front, middle or rear position. If you

place the cookware in the front you get the highest heat

setting. You can decrease the heat setting by moving the

cookware in the middle or to the rear position.

IMPORTANT!

Use only one pot when you operate the function.

General information

• 160 mm is the minimum bottom diameter of the

cookware for this function.

• Heat setting display for the left rear control bar

shows the position of the cookware on the induction

cooking area. Front

, middle , rear .

• Heat setting display for the left front control bar

shows the heat setting. To change the heat

setting use left front control bar.

Bekijk gratis de handleiding van Electrolux UltimateTaste 700 EHI635BF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.