Electrolux TD6-7LAC handleiding
Handleiding
Je bekijkt pagina 35 van 48
Installation manual
35
• Loosen the measuring branch screw (2) 1/4 turn; connect a manometer to the measuring branch and make sure
the connection is tight to prevent air leakage.
• Connect the power to the machine and select a program with heat.
• Start the machine.
• Check that the nozzle pressure is correct according to the gas type, see "Table of pressure and adjustment”.
• If the nozzle pressure should be adjusted:
– Demount the cover screw (3).
– Turn the screw (4). Clockwise: increasing nozzle pressure.
– Turn the screw (4). Counter Clockwise: decreasing nozzle pressure.
• Check that the gas is burning evenly. The blue flame on the burner is preferred.
4
3
2
fig.X03504
• Remount the cover screw (3).
• Remove the manometer and tighten the screw (2) when the adjustments are done.
Note!
After connection all joints must be checked. There must not be any leaks.
Bekijk gratis de handleiding van Electrolux TD6-7LAC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electrolux |
| Model | TD6-7LAC |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 4317 MB |
