Electrolux TD6-17S handleiding
Handleiding
Je bekijkt pagina 21 van 24
User manual
21
8 Disposal information
8.1 Appliance recyclability and disposal
8.1.1 Recyclability
Our appliances are manufactured using a significant percentage of recyclable metals (such as stainless steel, iron,
aluminium, galvanized sheet, copper, etc.), which can be recovered through the local recycling systems, in compli-
ance with the regulations in force in the country of use.
National regulations regarding waste disposal may vary. Disposal of the appliance must therefore be carried out in
accordance with the applicable legislation and the directives issued by the competent authorities in the country where
the appliance is decommissioned.
The components of the appliance must be separated and disposed of in accordance with their material composition
(e.g. metals, oils, greases, plastics, rubber, refrigerant gases, insulating boards and other insulating material, glass
wool, LEDs, etc.) and in full compliance with applicable local and international waste management regulations.
Compressors may contain oils and refrigerants fluids - are special waste and has to be recycled on local bases
regulations.
8.1.2 Procedure regarding appliance disposal and component / material recovery
This product should not simply be disposed of in the environment at the end of its life cycle; it is imperative instead ei-
ther to dispose of it in accordance with local environmental regulations, or, preferably, to deliver it whole to an author-
ized recycling center.
All removed components, including doors and other structural parts, must be delivered together with the appliance to
an authorized recycling or dismantling facility.
The dismantling/recycling center will apply state of the art technologies and methods available to them to effectively
disassemble the products for best recyclability.
Note that printed circuit boards, electrical motors or other components identified in European Union legislation to be
of high critical raw materials recovery potential need to be addressed specifically.
In case of doubts or questions, always refer to your reference customer care service.
Before disposing of the appliance, carefully inspect its physical condition and preservation state, checking for poten-
tial leaks of liquids or gases, as well as for broken parts that may pose hazards during handling and subsequent
dismantling.
The symbol on the product indicates that this product should not be treated as domestic
waste, but must be correctly disposed of in order to prevent any negative consequences for
the environment and human health. For further information on the recycling of this product,
contact the local dealer or agent, the customer care service or the local body responsible
for waste disposal.
Note!
When dismantling the appliance, any marking, this manual and other documents concerning the appliance
must be destroyed.
8.2 Disposal of packing
The packing must be disposed of in compliance with the current regulations in the country where the appliance is
used. All the packing materials are environmentally friendly.
They can be safely kept, recycled or burned in an appropriate waste incineration plant. Recyclable plastic parts are
marked as following examples.
PE
Polyethylene:
• Outer wrapping
• Instructions bag
PP
Polypropylene:
• Straps
PS
Polystyrene foam:
• Corner protectors
Bekijk gratis de handleiding van Electrolux TD6-17S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electrolux |
| Model | TD6-17S |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 1573 MB |
