Electrolux T41200CR handleiding
Handleiding
Je bekijkt pagina 41 van 44
Installation manual
41
7 Function check
May only be carried out by qualified personnel.
A function check must be made when the installation is finished and before the machine can be ready to be used.
Whenever a repair has been made, a function check must be performed before the machine can be used again.
Inspection of the door's solenoid switch
Start the machine.
• The machine must stop if the door is opened.
Inspection of the heater unit
• Let the machine work for five minutes on a program with heat.
• Check that the heating is working by opening the door and feel if there is heat in the drum.
Leak detection
• System leak detection.
• Clean the dirt traps.
Particle testing
Before performing particle testing make sure the machine has been in operation for approx 15 hours.
Ready to use
If all tests are OK the machine is now ready to be used.
If some of the tests failed, or deficiencies or errors are detected, please contact your local service organisation or
dealer.
The installer shall instruct the user on the operation of the appliance before leaving.
Bekijk gratis de handleiding van Electrolux T41200CR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electrolux |
| Model | T41200CR |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 3257 MB |
