Electrolux SensiCare 600 EFI633P94Q handleiding

Wasmachine

Electrolux

260 pagina's

PDF beschikbaar

Handleiding

/ 260

Je bekijkt pagina 72 van 260

the given information changes

accordingly.

If a selection is not possible an acoustic

signal sounds and the display shows

9.4 Additional information about

daily use

The SensiCare System load detection

The SensiCare System adjusts automatically

the programme duration to the laundry in the

drum to achieve perfect washing results in

the minimum possible time. The appliance

detects the load in the first 30 seconds. In the

programmes where Time Manager is

available, during this phase the display play a

simple animation. The drum rotates shortly.

At the end of the load detection, in case of

drum overload, the indicator

flashing in the display. You can pause the

appliance and remove the exceeding

garments. If not the washing programme

starts anyway. About 20 minutes after the

programme start, the programme duration

could be adjusted again depending on the

capacity of water absorption of the fabrics.

The SensiCare System is not available in

programmes with short cycles.

Starting a programme

Touch the Start/Pause button to start the

programme. The related indicator stops

flashing and stays on. The programme starts,

the door is locked. The display shows the

indicator The programme starts, the door is

locked. The display shows the indicator

Starting a programme with delay start

1. Touch the Delay Start button repeatedly

until the display shows the desired delay

time.

2. Touch the Start/Pause button. The

appliance door locks and starts the

countdown of the delay start. When the

countdown is completed, the programme

starts automatically.

Interrupting a programme and changing

the options.

1. When the programme is running, you can

change only some options. Touch the Start/

Pause button.

2. Change the options. The given information

in the display changes accordingly

3. Touch the Start/Pause

again. The

washing programme continues.

Cancelling a running programme

• Press the button On/Off button to cancel

the programme and to deactivate the

appliance. Press again to activate the

appliance.

• Rotate the selection knob to the "reset"

position activate the appliance . Wait 2

second. Now you can set a new washing

programme.

End of the programme

• The appliance stops automatically. In the

display comes on. The acoustic

signals operate (if they are active).

• The indicator of the Start/Pause button

goes off. The door locked goes off

and the door unlocks.

• Press the On/Off button for some seconds

to deactivate the appliance. Keep the door

and the detergent dispenser slightly ajar to

prevent mildew and odours.

Draining water out after end of cycle

If you have chosen a programme or an option

that does not empty out the water of the last

rinse you must remember to drain the water:

• Touch button Spin to decrease the spin

speed proposed by the appliance

• Press the Start/Pause

• When the programme is completed and

the door locked indicator goes off, you

can open the door.

• On/Off to deactivate the appliance.

Stand-by function

The Stand-by function automatically

deactivates the appliance to reduce the

energy consumption.

72 ENGLISH

/ 260

Bekijk gratis de handleiding van Electrolux SensiCare 600 EFI633P94Q, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.