Electrolux SensiCare 600 EFI633P94Q Handleiding (260 Pagina's)

Handleiding

/ 260

Je bekijkt pagina 62 van 260

Levels Water hardness range

°f

1)

°d

2)

°e

3)

mmol/l ppm

Hard >25 >14 >17 >2.5 >250

1)

French degrees

2)

German degrees

3)

English degrees

4)

Factory setting, able to satisfy most of the use conditions.

7.4 AutoDose configuration mode

Enter the AutoDose configuration mode

before proceeding with any programme

setting. The configuration mode may

cancel temporary settings .

1. Press the On/Off button for a few

seconds to activate the appliance.

2. Wait about 10 seconds for appliance

internal check.

3. Turn the programme dial to select a

washing programme.

4. To enter in configuration mode, hold

pressed the Temp. and the Spin buttons

simultaneously for a few seconds until

and the blinking detergent tank

and softener tank indicators appear in

the display. After 10 seconds without

interacting with control panel the

appliance exits the configuration mode.

5. Touch related tank buttons to toggle

function off and on. The display shows

OFF when a tank is disabled or shows

tank indicator when it is enabled.

6. To set basic dosage touch related tank

buttons until default dosage laundry

product and two arrows on bottom of

display appear. Touch the Temp. button

repeatedly to decrease the dosage and

the Spin button to increase it: minimum

step is 1 ml (each single step) or 10 ml

(when button is hold pressed).

7. After about 10 seconds the display

returns to the programme information

screen or hold pressed the Temp. and the

Spin buttons again to exit immediately.

7.5 Filling the detergent and

additives on AutoDose system

Please read "Detergents and other

treatments" in "Hints and tips" chapter.

We recommend that you do not exceed

the maximum indicated level ( ).

1. Open the detergent dispenser.

62 ENGLISH

/ 260

Bekijk gratis de handleiding van Electrolux SensiCare 600 EFI633P94Q, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.