Electrolux SensiCare 600 EFI622EX4E Handleiding (196 Pagina's)

Handleiding

Je bekijkt pagina 53 van 196

With the flap in the position DOWN:

• Do not use gelatinous or thick liquid

detergents.

• Do not exceed to liquid detergent dose

indicated on the flap.

• Do not set the prewash phase.

• Do not set the delay start function.

5. Measure out the detergent and the fabric

conditioner.

6. Carefully close the detergent dispenser.

Make sure that the flap does not cause a

blockage when you close the drawer.

10.5 Setting a programme

1. Turn the programme dial to select the

desired washing programme.

The indicator of the Start/Pause button

flashes.

The display shows an indicative programme

duration.

2. To change the temperature and/or the

spin speed, touch the related buttons.

3. If desired, set one or more options by

touching the related buttons. The related

indicators illuminate on the display and

the given information changes

accordingly.

If a selection is not possible an acoustic

signal sounds and the display shows

.

10.6 Additional information about

daily use

The SensiCare System load detection

The SensiCare System adjusts automatically

the programme duration to the laundry in the

drum to achieve perfect washing results in

the minimum possible time. The appliance

detects the load in the first 30 seconds. In the

programmes where Time Manager is

available, during this phase the display play a

simple animation. The drum rotates shortly.

At the end of the load detection, in case of

drum overload, the indicator is

flashing in the display. You can pause the

appliance and remove the exceeding

garments. If not the washing programme

starts anyway. About 20 minutes after the

programme start, the programme duration

could be adjusted again depending on the

capacity of water absorption of the fabrics.

The

SensiCare System is not available in

programmes with short cycles.

Starting a programme

Touch the Start/Pause button to start the

programme. The related indicator stops

flashing and stays on. The programme starts,

the door is locked. The display shows the

indicator The programme starts, the door is

locked. The display shows the indicator .

Starting a programme with delay start

1. Touch the Delay Start button repeatedly

until the display shows the desired delay

time.

2. Touch the Start/Pause button. The

appliance door locks and starts the

countdown of the delay start. When the

countdown is completed, the programme

starts automatically.

ENGLISH 53

Bekijk gratis de handleiding van Electrolux SensiCare 600 EFI622EX4E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.