Electrolux QuickDry QDC handleiding
Handleiding
Je bekijkt pagina 18 van 28
18
Installation manual
6.3 Exhaust duct
• Only rigid or flexible metal duct should be used for exhausting.
• Plastic ducting is not to be used.
• Recommended material for exhaust is galvanized steel.
• The duct is not to be assembled with screws or other fastening means that extend into the duct and catch lint.
• The exhaust air should not be vented into a wall, a ceiling, or a concealed space of building.
• The exhaust duct must lead clear of the building as condensation may cause frost damage to the building.
• The exhaust duct must lead to the outdoors.
• The exhaust duct must be placed in such a way that it is protected on the outside.
• The exhaust duct must be smooth on the inside (low air resistance).
• The exhaust duct must have gentle bends.
6.4 Shared exhaust duct
It is recommended that each machine is connected to a separate exhaust duct.
When several machines shall use the same exhaust duct the exhaust duct must increase after each machine. The
recommended diameter increase progression is the one in the table. Please consider that unnecessarily large ducts
create issues with the draught.
fig.W00198
Number of machines 1 2 3 4 5 6 7 8 9 10
Exhaust duct
⌀ mm
100 160 200 200 250 250 315 315 315 315
Recommended area
of fresh air intake
m
2
0.04 0.1 0.16 0.16 0.25 0.25 0.39 0.39 0.39 0.39
Minimum area of
fresh air intake
m
2
0.011 0.022 0.033 0.044 0.055 0.066 0.077 0.088 0.099 0.11
Bekijk gratis de handleiding van Electrolux QuickDry QDC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electrolux |
| Model | QuickDry QDC |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 1976 MB |
