Electrolux LMS2173NB handleiding
Handleiding
Je bekijkt pagina 26 van 88
26
www.electrolux.com
• The electrical outlet should be readily
accessible so that the unit can be
unplugged easily in an emergency.
Or it should be possible to isolate the
oven from the supply by incorporating a
switch in the xed wiring in accordance
with the wiring rules.
• The power supply cord may only be
replaced by an electrician.
• If the supply cord is damaged it must
be replaced by the manufacturer, its
service agent or similarly qualied
persons in order to avoid a hazard.
• The socket should not be positioned
behind the cupboard.
• The best position is above the
cupboard, see (A).
• Connect the appliance to a single
phase 230 V/50 Hz alternating current
via a correctly installed earth socket.
The socket must be fused
with a 10 A fuse.
• Before installing, tie a piece of string
to the power supply cord to facilitate
connection to point (A) when the
appliance is being installed.
• When inserting the appliance into the
high-sided cupboard, DO NOT crush
the power supply cord.
• Do not immerse the power supply cord
or plug in water or any other liquid.
• Do not allow the power supply cord
to run over any hot or sharp surfaces,
such as the hot air vent area at the top
rear of the oven.
2.2 Connecting the appliance
to the power supply
(A)
2 - ELECTROLUX_EN230_17LSOLO_SBI_BASE_AJ26UICTO.indd 262 - ELECTROLUX_EN230_17LSOLO_SBI_BASE_AJ26UICTO.indd 26 12/04/2023 12:43:3412/04/2023 12:43:34
Bekijk gratis de handleiding van Electrolux LMS2173NB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electrolux |
| Model | LMS2173NB |
| Categorie | Magnetron |
| Taal | Nederlands |
| Grootte | 8411 MB |
