Electrolux LKG500013W handleiding
Handleiding
Je bekijkt pagina 40 van 56
9. Set the maximum gas flow position on the
knob for the oven functions and let the
oven heat for at least 10 minutes.
10. Quickly turn the knob for the oven
functions from maximum to the minimum
gas flow position.
Control the flame. Make sure the flame does
not go out when you turn the knob to the
minimum gas flow position. There must be a
small regular flame on the oven burner
crown. If the flame goes out adjust the oven
burner again.
3.16 Levelling of the appliance
Use small feet on the bottom of appliance to
set the appliance top surface level with other
surfaces.
3.17 Anti-tilt protection
Set the correct height and area for the
appliance before you attach the anti-tilt
protection.
CAUTION!
Make sure you install the anti-tilt
protection at the correct height.
Make sure that the surface behind the
appliance is smooth.
You must install the anti-tilt protection. If you
do not install it, the appliance can tilt.
Your appliance has the symbol shown on the
picture (if applicable) to remind you about the
installation of the anti-tilt protection.
1. Install the anti-tilt protection B - 328 mm
down from the top surface of the
appliance and A - 67 mm from the side of
the appliance into the circular hole on a
bracket. Screw it into the solid material or
use applicable reinforcement (wall).
A
B
2. You can find the hole on the left side at
the back of the appliance. Lift the front of
the appliance and put it in the middle of
the space between the cupboards. If the
space between the bench cupboards is
larger than the width of the appliance, you
40 ENGLISH
Bekijk gratis de handleiding van Electrolux LKG500013W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electrolux |
| Model | LKG500013W |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 4932 MB |
