Electrolux IK2590BNR handleiding
Handleiding
Je bekijkt pagina 11 van 48
2. After few seconds appears on the
display and the Connectivity indicator
blinks.
3. Continue to follow the instructions in the
app.
4. During the process, the display may
temporarily show .
After the onboarding, the Connectivity
indicator stays on. Display shows the set
temperatures.
Disabling the appliance wireless
connection
Press and hold Connectivity button for 3 sec
to disable the Wi-Fi. The Connectivity
indicator switches off and the appliance
beeps once.
Press and hold the Connectivity button for 3
sec to re-establish the connection.
After reset, the Connectivity indicator
may be off. Wait until it turns on.
Resetting the appliance wireless
connection
Check if the Connectivity indicator is visible
on the display. If the Wi-Fi is switched off, the
attempt to reset the connection will turn the
function on.
Press and hold the Connectivity button for 10
sec to reset the Wi-Fi configuration. The
appliance beeps to confirm the successful
reset.
To re-establish the connection, refer to the
“Disabling the appliance wireless connection"
section.
3.13 Setting mode
The Setting mode allows you to enable or
disable the ECOMETER indicator, the Rest
mode, the Sabbath mode, to reset the
appliance factory settings and to change the
temperature units from °C to °F.:
Activating the Setting mode
1. Press and hold the ECO button for
approx. 3 sec. The display shows blinking
.
2. Once the Setting mode is switched on,
the display shows .
Press and hold the ECO button for approx. 3
sec to deactivate the Setting mode.
The Setting mode deactivates if you do not
interact with the control panel for 60 sec.
Navigating the Setting mode
Tap the fridge temperature button to change
the parameter. Tap the freezer temperature
button to change the parameter value.
Display Default parameters
ECOMETER indicator
Button sounds
Temperature units
Sabbath mode
Rest mode
Factory settings
ECOMETER indicator
In order to switch the ECOMETER on or off:
1. Activate the Setting mode.
2. Tap until the display shows for
the enabled or for the disabled
ECOMETER indicator.
3. Exit the Setting mode.
Button sounds
To enable or disable the sounds:
1. Activate the Setting mode.
2. Tap
until the display shows . Tap
to switch the sounds on or off. The
indicator will change to for the
enabled or for the disabled sounds.
3. Exit the Setting mode.
Temperature units
To change the temperature unit:
1. Activate the Setting mode.
ENGLISH 11
Bekijk gratis de handleiding van Electrolux IK2590BNR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electrolux |
| Model | IK2590BNR |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 4417 MB |
