Electrolux FEH6LV702 handleiding
Handleiding
Je bekijkt pagina 9 van 68
3.3 Levelling of the appliance
Use small feet on the bottom of appliance to
set the appliance top surface level with other
surfaces.
3.4 Anti-tilt protection
CAUTION!
Install the anti-tilt protection to prevent
the appliance from falling under incorrect
loads. The anti-tilt protection only works
when the appliance is put in a correct
area.
Your appliance has the symbols shown
on the pictures (if applicable) to remind
you about the installation of the anti-tilt
protection.
CAUTION!
Make sure you install the anti-tilt
protection at the correct height.
Make sure that the surface behind the
appliance is smooth.
1. Set the correct height and area for the
appliance before you attach the anti-tilt
protection.
2. Install the anti-tilt protection 176 mm
down from the top surface of the
appliance and 24 mm from the left side of
the appliance into the circular hole on the
bracket. See the illustration. Screw it into
the solid material or use applicable
reinforcement (wall).
3. You can find the hole on the left side at
the back of the appliance. See the
illustration. Put the appliance in the
middle of the space between the
cupboards (1). If the space between the
bench cupboards is larger than the width
of the appliance, you must adjust the side
measurement to centre the appliance.
1
24 mm
176 mm
3.5 Electrical installation
WARNING!
The manufacturer is not responsible if
you do not follow the safety precautions
from Safety chapters.
This appliance is supplied without a main
plug or a main cable. The connection terminal
is located behind the back panel.
ENGLISH 9
Bekijk gratis de handleiding van Electrolux FEH6LV702, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electrolux |
| Model | FEH6LV702 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 5606 MB |
