Electrolux FC48 handleiding
Handleiding
Je bekijkt pagina 29 van 36
05306004
Page
Notice
Date
INSTALLATION
MANUAL
17
6
1004
D0661
D0663
D0662
Connection diagrams for the control circuit power supply
transformer (T1) as a function of the various customer power
supply voltages
(only for the machines without neutral).
The tension of the control circuit delivered by the transformer must be 230 volts, single-
phase. The supply tension for your machine is normally of 400 volts between 2 phases, this
tension can however be different. The following schemes show how to adjust the tension at
the secondary of the transformer.
6. Installation/
Putting into service
Measure the power supply voltage at the
transformer primary with a voltmeter
between the transformer 0 and 400 volt
terminals.
- If the voltage is equal to 400 volts, do
not touch the transformer connection
which must be as shown in the adjacent
figure.
- If the voltage is > 400 volts (for example
: 420 or 430 volts), connect the wires to
the transformer as shown in the adjacent
figure.
- If the voltage is significantly < 400 volts
(for example: 370 or 380 volts), connect
the wires to the transformer as shown in
the adjacent figure.
Bekijk gratis de handleiding van Electrolux FC48, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electrolux |
| Model | FC48 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2986 MB |
