Electrolux EWW1242R9SC handleiding
Handleiding
Je bekijkt pagina 13 van 72
ENGLISH 13
45°
35°
4.3 Water Inlet
Connect the water inlet hose to a tap
with 3/4” BSP thread. Use the hose
supplied with the machine. DO NOT USE
OLD HOSES.
The inlet hose must not be lengthened.
If it is too short and you do not wish to
move the tap, you will have to purchase
a new, longer hose specially designed for
this type of use.
Loosen the ring nut to angle the hose
to the left or right depending on the
position of your water tap. Do not place
the inlet hose downwards.
After positioning the inlet hose, be sure
to tighten the ring nut again to prevent
leaks.
Max.
91 cm
Max.
117 cm
The end of the drain hose can be
positioned in three ways:
• Hooked over the edge of a sink, using
the plastic hose guide supplied with
the machine.
Fitting Hose Guide
In this case, make sure the end cannot
come unhooked when the machine is
being emptied. This could be done by
tying it to the tap with a piece of string
or attaching it to the wall.
4.4 Water Drainage
Pull hose, and adjust
length to suit trough.
Bend
hose
Hose
Guide
Pull apart to
insert hose.
45 cm approx.
Bekijk gratis de handleiding van Electrolux EWW1242R9SC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electrolux |
| Model | EWW1242R9SC |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 7059 MB |
