Electrolux EWW1043R7WC handleiding
Handleiding
Je bekijkt pagina 32 van 52
32 ENGLISH
When drying a big amount
of laundry, to have good drying
performances, make sure that the
laundry itself is not rolled up and that is
uniformly distributed in the drum.
After some minutes from the end
of the programme, the energy saving
function deactivates the machine
automatically.
After drying phase, clean the drum,
the seal and the inside of the door with
a wet cloth.
11.2 At the end of the drying
programme
• The appliance stops automatically.
• The acoustic signals operate (if they
are active).
• In the display " " comes on.
• The indicator of the Start/Pause " "
touch key goes off. The door locked "
" goes off and the door unlocks.
The appliance continues to operate
with the anticrease phase for
approximately 30 minutes or more if
Anticrease option was set.
The anticrease phase reduces
creasing.
1. Remove the laundry from the machine.
2. Make sure that the drum is empty.
You can remove the laundry before
the anticrease phase is completed.
We recommend, for better results,
that you remove the laundry when
the phase is almost completed or
completed. The icon " " remains lit.
• Press the On/Off touch key for some
seconds to deactivate the appliance.
12. DAILY USEWASHING & DRYING
12.1 Complete wash & dry
programme
Automatic Non-Stop programme or
programmes
Depending on the model, the appliance
may be equipped with one or more Wash
and Dry programmes, automatic one-go
programmes where it is not necessary to
set the drying phase manually (refer to
programme change on page 17).
Proceed as follows:
1. After loading laundry and detergent,
press the On/Off touch key for some
seconds to activate the appliance.
2. Set the Wash And Dry programme
by means of the programme selector
knob.
3. Touch the Start/Pause " " touch key
to start the programme.
Non-automatic wash & dry
programmes
In some washing programmes, you can
combine the washing cycle and the drying
phase selecting one of the dryness level
shown in the panel.
Proceed as follows:
1. After loading laundry and detergent,
press the On/Off touch key for some
seconds to activate the appliance.
2. Load the laundry one item at a time.
3. Put the detergent and the additives in
the appropriate compartment.
4. Turn the programme selector knob to
the washing programme. The appliance
defaults to the washing only mode and
the indicator of the default soil level
touch key is on. The display shows
the default temperature and spin. If
necessary, change them according to
your laundry. The display also shows
the maximum recommended load for
washing phase.
Bekijk gratis de handleiding van Electrolux EWW1043R7WC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electrolux |
| Model | EWW1043R7WC |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 5322 MB |
