Electrolux EWF9043R7SC handleiding
Handleiding
Je bekijkt pagina 27 van 44
ENGLISH 27
10.4 Starting A Cycle ( )
10.5 Interruption Of A Programme
To start a programme, press the Start/
Pause touch key. The corresponding
pilot light will stop flashing and a default
programme duration will be displayed on
the screen.
After approx. 15 minutes from the start of
a programme:
• The appliance will automatically
adjust the selected programme
duration according to the type and
size of the load.
• The display will show adjusted
programme duration.
• To pause, press Start/ Pause.
The indicator will start flashing.
• Press the Start/Pause again.
The programme will continue.
If you press any touch key while a
programme is operating, the symbol
" " will flash on display along
with buzzer sound. (except Start/Pause
touch key and On/Off touch key)
10.6 Changing A Programme
Changing a running programme is possi-
ble only by switching off the appliance.
• Press the "On/Off" touch key to cancel
the programme and to turn off the
appliance.
• Press the "On/Off" touch key again to
turn on the machine.
Now you can set a new wash programme
and change any available options. Press
Start/Pause to start the new programme.
10.7 Changing The Options
10.8 Opening The Door
1. Press the Start/Pause touch key. The
indicator will start flashing.
2. If available change the options that
you wish.
3. Press Start/Pause again. The
programme will continue.
It may be possible to change some of
the options after a wash programme has
started.
While a programme or the Finish In is
operating, the appliance door is locked
and the display shows the indicator " ".
First, set the machine to PAUSE by press-
ing the "Start/Pause" touch key. Wait until
the door lock indicator goes off, then the
door can be opened.
If the door lock icon " " does not dis-
appear, this means that the machine is
already heating and the water level is
above the bottom edge of the door or
the drum is turning. In this case the door
CAN NOT be opened. If you need to
open it, you must drain the water to open
the door.
In case of Remote Start ( ) option is
activated, when program cycle end
and anticrease phase is complete. The
door will remain locked for 5 minutes, if
you want to open the door at that time,
press Remote Start ( ) touch key once
to turned off function then the door is
unlocked.
The appliance will not drain the
water (except programmes; Sanitise,
Spin, Tub Clean).
WARNING!
In case of emergency please refer to
section "Emergency door opening" on
page 40.
Bekijk gratis de handleiding van Electrolux EWF9043R7SC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electrolux |
| Model | EWF9043R7SC |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 4548 MB |
