Electrolux EWF1242R9WC handleiding
Handleiding
Je bekijkt pagina 33 van 64
ENGLISH 33
Before proceeding with next
steps, be sure that our app has been
downloaded and configured and you
smart device connected to your home
network. Refer to "Download, installing,
and configuring our app" paragraph.
Connecting your appliance
Open our app from your smart device and
follow the instruction displayed to add
your appliance.
During association phase, Our app could
redirects to the smart device Wi-Fi settings
to select the home network and requires
to enter the Wi-Fi password to connect the
appliance.
After Connecting... phase, if successfully
concluded, "Connected" message is shown.
Otherwise, the message "Not connected" is
displayed.
Once connected, tapping on the Remote
Start Mode key button on will enable
users to be able to start cycles remotely on
our app.
Auto connection to registered network
Once the appliance has been successfully
set-up and registered to the home network,
every time it is powered on, it will try to
connect to the network automatically.
There will not be any sound when Wi-Fi
connection is successful.
Connecting to a different network
(Reopening Access Point)
Every time user tap and hold Remote
Start Mode key button for 5 seconds,
the access point will be open and
broadcasted. New network credentials
received at this point will overwrite
previously saved credentials, and the
appliance then connects to the new Wi-Fi
network.
Refer to "Connection your appliance"
section to perform the connection.
Turning Off Wi-Fi
If the user decides to no longer connect the
appliance to Wi-Fi, he can tap and hold
Remote Start Mode key button for 10
seconds and the appliance will reset and
turn off. It is also possible to disable Wi-Fi
from the settings menu.
11.3 Over-the-air update
Application may propose an update for
your appliance.
If a programme is running, our app
notifies that the update will start at the
end of the programme.
During the update, the appliance shows
a message in the display.
Do not switch off or unplug the appliance
during update.
The appliance will be usable again
at the end of the update, without any
notification about successful update.
If an error occurs, the appliance shows
a message in the display: just press any
buttons or turn the knob to return to
normal use.
The Wi-Fi Always On function may
affect your energy consumption.
11.4 Wi-Fi Always On
The Wi-Fi Always On function is available
in our app.
This function keeps the appliance
connected to the network even when the
appliance is turned off.
Wi-Fi icon is on.
The icon blink, Machine can't connect
the network.
It is possible to turn the appliance on by
pressing the On/Off button or through
our app.
After confirming the reset the display shows
the message "Network is reset" and the
Wi- Fi is set off.
Bekijk gratis de handleiding van Electrolux EWF1242R9WC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electrolux |
| Model | EWF1242R9WC |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 6213 MB |
