Electrolux EWF1242R9SC handleiding
Handleiding
Je bekijkt pagina 56 van 64
56 ENGLISH
18.1 Possible Failures
18. TROUBLESHOOTING
Malfunction Possible cause Solution
Machine does
not start:
The door has not been closed. Close the door firmly.
The plug is not properly inserted
into the power socket.
Insert the plug into the power
socket.
There is no power at the socket. Please check your domestic
electrical installation.
The Start/Pause touch key has not
been pressed.
Press the Start/Pause touch key.
The "Finish In" has been selected. If the laundry are to be washed
immediately, cancel the "Finish In".
The Main supply is unstable. Wait until the main supply is
stable. Appliance will start
automatically.
Machine does
not fill the
water:
The water tap is closed. Open the water tap.
The inlet hose is squashed or
kinked.
Check the inlet hose connection.
The filter in the inlet hose is
blocked.
Clean the water inlet hose filter.
The door is not properly closed. Close the door firmly.
Machine fills
then empties
immediately:
The end of the drain hose is too
low.
Refer to relevant paragraph in
"water drainage" section.
Certain problems are due to lack of simple maintenance or oversights, which can be
solved easily without calling out an engineer. Before contacting your local Service
Centre, please check troubleshooting below.
Once the problem has been eliminated, press the Start/Pause button to restart the
programme. If after all checks, the problem persists, contact your local Service
Centre.
WARNING!
Deactivate the appliance before you do the checks.
If an error appears on the display, please follow the initial troubleshooting steps as
suggested.
Bekijk gratis de handleiding van Electrolux EWF1242R9SC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electrolux |
| Model | EWF1242R9SC |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 6213 MB |
