Electrolux EWF1042R9SC handleiding
Handleiding
Je bekijkt pagina 43 van 64
ENGLISH 43
14.12 Draining water out after end
of cycle
14.13 Stand-by function
If you have chosen a programme or
an option that does not empty out the
water of the last rinse, the programme is
completed, but:
• Draining phase is shown in the display
and the door is locked .
• The indicator of the Start/Pause
key button starts flashing.
• The drum still turns at regular intervals
to prevent creases in the laundry.
• The door stays locked.
• You must drain the water to open the
door.
The Stand-by function automatically
deactivates the appliance to reduce the
energy consumption when:
• You do not use the appliance for
5 minutes when no programme is
running.
- Press the button On/Off to
activate the appliance again.
• 5 minutes after the end of the washing
programme.
- Press the On/Off button to
activate the appliance again.
- The display shows the end of the
last programme.
- Turn the programme dial to set a
new cycle.
If you set a programme or an option
that ends with water in the drum, the
Stand-by function doesn't deactivate
the appliance to remind you to drain
the water.
If the Wi-Fi Always On function is
active, only the indicator goes on.
Bekijk gratis de handleiding van Electrolux EWF1042R9SC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electrolux |
| Model | EWF1042R9SC |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 6213 MB |
