Electrolux EW9H59A handleiding
Handleiding
Je bekijkt pagina 24 van 68
After touching the Avvio/Pausa key
button, the maximum declared load indicator
goes off, the SensiCare System starts the
laundry load detection:
1. The appliance detects the load in the first
minutes. During this phase scrolling
dashes play a simple animation.
2. During this phase the drum rotates
shortly.
3. The programme duration could be
adjusted.
At the end of the load detection, in case of
drum overload, the indicator is
flashing in the display:
In this case, for 30 seconds, it is possible to
pause the appliance and remove the
exceeding garments.
Once removed the exceeding garments,
touch the Avvio/Pausa key button to start
the programme again.
Important! If the laundry amount will not be
reduced, the drying programme starts
anyway, despite the overload. In this case, it
will be not possible to guarantee the best
drying results.
The SensiCare System is not available
with all programmes such as Lana and
programmes with short duration.
11.4 Change a programme
1. Press the on/off button to deactivate
appliance
2. Press the on/off button to activate the
appliance.
3. Set the programme.
11.5 At the end of the programme
When the programme is completed:
• An intermittent acoustic signal operates.
• The display shows
• The indicator is on.
• The indicators Filter and Tank may
come on.
• The Avvio/Pausa indicator is on.
The appliance continues to operate with the
anti-crease phase for approximately 30
minutes or more if Antipiega option was set
(see chapter
Option - Antipiega
).
The anti-crease phase reduces creasing.
You can remove the laundry before the anti-
crease phase is completed. We recommend,
for better results, that you remove the laundry
when the phase is almost completed.
When the anti-crease phase is completed:
• The display still shows
• The indicator is off.
• The indicators Filter and Tank
remain on.
• Avvio/Pausa indicator goes off.
1. Press the on/off button to deactivate the
appliance.
2. Open the appliance door.
3. Remove the laundry.
4. Close the appliance door.
Possible causes of unsatisfactory drying
results:
• Inadequate default dryness level settings.
See chapter
OPTIONS: Dryness Level -
Adjustment of the target final moisture
• Room temperature is too low or too high.
Optimal room temperature is between
18°-25°C.
Always clean the filter and empty the
water container when a programme is
completed.
Leave the door slightly opened after
every cycle to avoid moisture.
11.6 Low power mode
To reduce energy consumption, this function
automatically deactivates the appliance:
• After 5 minutes if you do not start the
programme.
• After 5 minutes from the end of the
programme or anticrease phase.
24 ENGLISH
Bekijk gratis de handleiding van Electrolux EW9H59A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electrolux |
| Model | EW9H59A |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 6249 MB |
