Electrolux EW9H59A handleiding
Handleiding
Je bekijkt pagina 15 van 68
7.1 QR code on rating plate
00000000
00A
Mod.
xxxxxxxxx
000V ~ 00Hz 0000 W
910000000
00
Prod.No.
SCANNING...
QR code can be used in two ways:
• Scan the QR code with the built-in camera
app to download our app from the App
store on your smart device and follow the
required steps.
• Pairing your smart device with appliance
to simplify the process. Scan the QR code
with QR code scanner built-in our app.
7.2 Installing our app
When connecting the tumble dryer to the
application, stand near it with Your smart
device.
Make sure that your smart device is
connected to the wireless network.
1. Go to the App Store on your smart device
or scan QR code (
see chapter "QR code
on rating plate"
).
2. Download and install our app.
3. Start the application. Select the country
and language and login with Your email
and password. If you do not have an
account, create a new one following the
instructions in our app.
7.3 Wireless connection
configuration
Before you begin the configuration download
and install our app on your smart device.
1. Push the on/off button to switch on the
appliance.
2. Wait approximately 8 seconds.
3. Press and hold the Partenza da remoto
button for around 5 seconds until you
hear a single 'click' sound.
The symbols: and appear on the
display. After few seconds only flashing
symbol: remains. Appliance is starting up
the connection, it takes around 10 seconds
for the wireless module to activate. When
ready the symbol: (Access Point)
appears on the display. Access Point is
open for around 5 minutes.
4. Configure our app on your smart device
and follow the on screen instructions to
connect the appliance to your WiFi
network.
5. If the connection is established,
symbol is off and the WiFi icon stays
lit steadily.
Each time you switch the appliance on,
the appliance attempts to connect to the
network automatically. When the
connection is established the symbol:
stops flashing.
Connecting to a different network
(Reopening Access Point)
Every time user tap and hold Partenza da
remoto key button for 5 seconds, the access
point will be open and broadcasted. New
network credentials received at this point will
overwrite previously saved credentials, and
the appliance then connects to the new Wi-Fi
network.
Turning Off Wi-Fi
If the user decides to no longer connect the
appliance to Wi-Fi, he can tap and hold
Partenza da remoto key button for 10
seconds and the appliance will reset and turn
off.
The display shows only for 5
seconds while all other indicators on control
panel are Off.
After reset, the display goes back to initial
state, with Wi-Fi icon
turned off.
ENGLISH 15
Bekijk gratis de handleiding van Electrolux EW9H59A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electrolux |
| Model | EW9H59A |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 6249 MB |
