Electrolux EW9H4Y9A handleiding
Handleiding
Je bekijkt pagina 21 van 64
Real drying time will depend on type of
the load (quantity and composition), the
room temperature and the initial moisture
after spinning phase of your laundry.
4. Press the Avvio/Pausa touch button.
The programme starts.
11.2 Starting the programme with
delay start
1. Set the correct programme and options
for the type of load.
2. Press the delay start button again and
again until the display shows the delay
time you want to set.
You can delay the start of a
programme from a minimum of 1
hour to a maximum of 20 hours.
3. Press the Avvio/Pausa touch button.
The display shows the countdown of the
delay start.
When the countdown is completed, the
programme starts.
11.3 Change a programme
1. Press the on/off button to deactivate
appliance
2. Press the on/off button to activate the
appliance.
3. Set the programme.
Alternatively:
1. Rotate the selector knob to the "Reset"
position.
2. Wait for 1 second. The display shows
.
3. Set the programme.
11.4 At the end of the programme
When the programme is completed:
• An intermittent acoustic signal operates.
• The display shows
• The indicator is on.
• The indicators Filter and Tank may
come on.
• The Avvio/Pausa indicator is on.
The appliance continues to operate with the
anti-crease phase for approximately 30
minutes or more if Antipiega option was set
(see chapter
Option - Antipiega
).
The anti-crease phase reduces creasing.
You can remove the laundry before the anti-
crease phase is completed. We recommend,
for better results, that you remove the laundry
when the phase is almost completed.
When the anti-crease phase is completed:
• The display still shows
• The indicator is off.
• The indicators Filter and Tank
remain on.
• Avvio/Pausa indicator goes off.
1. Press the on/off button to deactivate the
appliance.
2. Open the appliance door.
3. Remove the laundry.
4. Close the appliance door.
Possible causes of unsatisfactory drying
results:
• Inadequate default dryness level settings.
See chapter
OPTIONS: Dryness Level -
Adjustment of the target final moisture
• Room temperature is too low or too high.
Optimal room temperature is between
18°-25°C.
Always clean the filter and empty the
water container when a programme is
completed.
Leave the door slightly opened after
every cycle to avoid moisture.
11.5 Low power mode
To reduce energy consumption, this function
automatically deactivates the appliance:
• After 5 minutes if you do not start the
programme.
• After 5 minutes from the end of the
programme or anticrease phase.
ENGLISH 21
Bekijk gratis de handleiding van Electrolux EW9H4Y9A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electrolux |
| Model | EW9H4Y9A |
| Categorie | Wasdroger |
| Taal | Nederlands |
| Grootte | 5806 MB |
