Electrolux EW9F710GCY handleiding
Handleiding
Je bekijkt pagina 19 van 120
Max
▼
Max
▼
Max
▼
SALT
4. Close the salt compartment and the
detergent dispenser.
Regularly check if there is enough salt.
The compartment
Salt
can contain about 600
gr of salt that are sufficient for about two
months if the default water hardness level
(C04) is set and the water softener is
activated during wash phase only. A different
water hardness level or different setting may
increase or decrease the salt consumption.
Refer to 'How to set the water hardness level'
and 'How to set the water softener also during
rinse phase'.
The display shows the message Refill salt at
the end of a cycle when compartment
needs to be refilled with salt, even if a little
salt still remains.
WARNING!
Pour the salt in the compartment
Salt
only.
WARNING!
Do not put anything but salt in the
compartment
Salt
. If any other detergent/
additive is poured inadvertently in this
compartment, please refer to 'Eliminating
detergent or other additives from salt
compartment' in 'Troubleshooting'
chapter.
Only use special salt for dishwasher
and/or washing machine. The proper salt
can be ordered from the web site!
Other types of salts are less efficient and
over time could damage the water
softener technology permanently.
WARNING!
Do not use fine salt!
The appliance works exploiting its full
potential with salt. Salt refilling when
required by the appliance maintains the
softening system efficient. If you use the
appliance without salt for a long time,
once the salt is finally refilled, the water
softener function is completely restored
after a few long washing cycles.
10.4 Water softener regeneration
After a few cycles, the appliance may need to
regenerate the water softener.
The regeneration process is automatically
ensured when running programmes such as
Cottons and Synthetics routinely even if the
programme duration is reduced by tapping
the Finish in button once, if available in the
appliance.
Other programmes may perform the
regeneration process automatically, when
settings and conditions allow it.
If you usually run very short cycles, the
regeneration process may not occur: you
could see that salt has not been used,
since it is consumed during regeneration
phase only.
To ensure the regeneration process run
a Cottons or a Synthetics programme
once a week or every two weeks at
least.
ENGLISH 19
Bekijk gratis de handleiding van Electrolux EW9F710GCY, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electrolux |
| Model | EW9F710GCY |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 11378 MB |
